Licensed & Insured, in Oceanside and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Oceanside
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (442) 333-2316 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Oceanside and surrounding areas · On-site visits included · Free estimate within 24h
Oceanside Metal Roofing is a team of local certified professionals based in Oceanside. We respond quickly in Oceanside and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (442) 333-2316⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews
“Had them put up a metal roof on our horse barn out in Bonsall, about 40 by 60 feet with a decent pitch. Crew of four knocked it out in three days and the panels are dead straight. My horses are finally out of the weather and I didn't have to worry about a thing.”
Commercial Metal Roofing
“We wanted a real copper awning over the back patio and these guys delivered. The soldering on the seams is beautiful and they even walked me through how the patina will develop over the next few years. Worth every penny.”
Copper Specialty Metal Roofing
“Our old hay shed roof was rusted through and we needed something that would actually hold up. Oceanside Metal Roofing came out to the property, measured everything, and had new corrugated panels on in under a week. Solid work, fair price, and they cleaned up all the old screws and scrap without me asking.”
Agricultural Metal Roofing
“They installed a standing seam roof on our 2,400 sq ft house and the whole thing took about five days. The crew was respectful, showed up when they said they would, and the finished roof looks incredible from the street. Only small thing was they left a few metal shavings in the driveway that I had to sweep up myself, no big deal overall.”
Metal Roof Installation
“We had a leak around our skylight after the last round of storms and these guys tracked it down fast. Turns out the flashing was shot. They replaced it and re-sealed everything, and we haven't had a drop since. Relieved is an understatement.”
Flashing & Skylight Repair
“Replaced our old failing roof with a stone-coated steel system and honestly the house looks brand new. They tore off the old stuff, hauled it all away, and had the new roof on in four days. The foreman kept me updated every single day, which I really appreciated.”
Metal Roof Replacement
“Living a block from the beach, we were worried about salt air eating through another roof. Oceanside Metal Roofing put on a standing seam roof with the right coastal-grade panels and fasteners, and explained exactly why it would hold up. Two months in and it still looks perfect.”
Standing Seam Metal Roofing
“Did a metal roof-over on our house instead of a full tear-off and saved a ton of money and time. They laid down the underlayment and new panels right over the old shingles in about three days. I was skeptical at first but the finished job looks clean and the price was way better than a full replacement. Would use them again.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in Oceanside · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel install | Starting at $8/sq ft | Includes tear-off, underlayment, panels, and trim; pitch and roof complexity raise the rate. |
| Standing seam install | Starting at $14/sq ft | Concealed fasteners and custom flashing included; panel width and seam count move the price. |
| Stone-coated steel install | Starting at $12/sq ft | Tile-profile steel with Class A assembly; HOA design review and valleys add labor. |
| Complex or large-scale job | On estimate | Multi-level roofs, low-slope sections, and heavy flashing work need an on-site look first. |
| Travel | Included | in Oceanside and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (442) 333-2316, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, aluminum (coastal) | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and standard flashing; salt-air grade aluminum costs more than steel. |
| Standing seam installation, steel (inland) | Starting at $10/sq ft | Includes Class A steel panels, clips, underlayment, and standard flashing; complex roofs and tear-off add cost. |
| Tear-off and deck repair | On estimate | Removal of existing tile or shingles plus sheathing repair; price depends on deck condition and access. |
| Retrofit over existing shingles | On estimate | Standing seam over existing shingles where code allows; the existing layer count and deck condition set the price. |
| Travel | Included | in Oceanside and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (442) 333-2316, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener replacement | Starting at $9/sq ft | Includes tear-off, new underlayment, panels, and haul-away; pitch and deck damage move the price. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and formed seams; roof complexity and panel length drive the final number. |
| Stone-coated steel replacement | Starting at $13/sq ft | Tile or shake profile with Class A rating; tear-off layers and valley count affect cost. |
| Complex or large-scale job | On estimate | Steep two-story, multiple chimneys, or heavy deck repair needs an on-site walk before pricing. |
| Travel | Included | In Oceanside and surrounding North County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (442) 333-2316, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one layer of shingles | Starting at $7/sq ft | Includes deck inspection, battens, underlayment, panels, and standard flashing on a sound single-layer roof |
| Retrofit with new edge metal and flashing | Starting at $9/sq ft | Adds new drip edge, ridge caps, and chimney or skylight flashing where old transitions are worn |
| Stone-coated steel or standing seam retrofit | Starting at $11/sq ft | Premium panel profiles and finishes raise material cost and add install time on cut-up roofs |
| Partial tear-off plus retrofit | On estimate | Needs an on-site look to measure failed deck sections and price the repair before panels go on |
| Travel | Included | in Oceanside and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (442) 333-2316, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (single panel, flashing, or small reseal) | Starting at $450 | Covers inspection, one panel or flashing repair, and resealing, with price moving on pitch and access. |
| Screw and washer replacement (partial roof) | Starting at $850 | Includes pulling rusted fasteners and installing new screws and butyl washers on the affected area. |
| Multi-panel or chimney and skylight flashing rebuild | Starting at $1,200 | Covers panel replacement plus flashing rebuild, with cost driven by penetration count and roof height. |
| Full roof re-fastening or widespread corrosion repair | On estimate | Needs an on-site look to count fasteners, check panel condition, and confirm the scope before pricing. |
| Travel | Included | in Oceanside and surrounding North County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (442) 333-2316, with a written scope and no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak diagnosis and repair | Starting at $450 | Includes water test, source confirmation, and repair of one isolated leak point with standard fasteners or sealant. |
| Multi-point fastener and seam repair | Starting at $850 | Covers several leak points on one roof face, with replacement washered screws and seam or lap resealing. |
| Flashing, chimney, or skylight rebuild | Starting at $1,200 | Removal and rebuild of failed flashing terminations, priced by height, pitch, and number of penetrations. |
| Emergency storm tarping | Starting at $350 | Temporary water diversion during active winter storms, credited toward the permanent repair when booked together. |
| Full roof leak inspection with report | Free with repair | Photo-documented findings across the panel field, fasteners, and flashings, no obligation to proceed. |
| Travel | Included | in Oceanside and surrounding areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw replacement | Starting at $750 | Replaces failed fasteners and washers on a small single-story roof section. |
| Full re-fastening pass | Starting at $1,450 | Replaces every screw with coated fasteners across the full roof area. |
| Wind-load retrofit | Starting at $1,200 | Adds fasteners at ridge and eave and reseats panels lifted by wind. |
| Large barn or two-story roof | On estimate | Square footage, pitch, and fastener count need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (442) 333-2316, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel installation (outbuilding) | Starting at $5.50/sq ft | Includes underlayment, panels, fasteners, and basic trim on an accessible single-slope or gable roof. |
| R-panel or 5V installation (residential) | Starting at $7.00/sq ft | Includes panel layout, closures, ridge and eave trim, and flashing around penetrations on a cut-up roof. |
| Re-fastening and screw replacement | Starting at $450 | Includes pulling backed-out screws, new washers, re-seating panels, and adding closures at ridges. |
| Panel replacement over existing framing | On estimate | Deck condition, panel count, and access determine the number, so an on-site look is required first. |
| Travel | Included | In Oceanside and surrounding North County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (442) 333-2316, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural profile steel shingle | Starting at $9/sq ft | Includes tear-off of one layer, synthetic underlayment, standard trim and flashing. |
| Slate or shake profile steel shingle | Starting at $13/sq ft | Heavier textured profile with premium finish, priced by roof pitch and valley count. |
| Full tear-off and re-deck | On estimate | Needed when multiple layers hide soft sheathing; requires an on-site deck inspection first. |
| Travel | Included | in Oceanside and surrounding North County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (442) 333-2316, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, tile or shake profile, standard single-story | From $9/sq ft | Includes tear-off, underlayment, panels, and standard flashing on an accessible Oceanside roof. |
| Two-story or steep-pitch installation | From $12/sq ft | Higher labor and staging cost for steep pitch, height, and limited ladder access on the property. |
| Retrofit over existing roof | From $11/sq ft | Batten system and panels over a sound single-layer roof, subject to code limits on existing layers. |
| Deck repair or sheathing replacement | On estimate | Rotted sheathing and framing are found after tear-off, so the scope needs an on-site look first. |
| Travel | Included | In Oceanside and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (442) 333-2316, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper bay window or porch cap | Starting at $20/sq ft | Includes templating, flat-seam copper, soldered joints, and new flashing at the wall. |
| Zinc or aluminum accent detail | Starting at $16/sq ft | Includes formed panels and trim; lighter metal lowers material cost on simple shapes. |
| Turret, cupola, or curved detail | On estimate | Radius, number of planes, and access drive the price, so an on-site look comes first. |
| Custom flashing and trim | Starting at $45/linear ft | Includes fabrication and installation where metal meets stucco, brick, or chimney. |
| Travel | Included | in Oceanside and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (442) 333-2316, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic reflective coating | Starting at $2.50/sq ft | Wash, spot prime, and one reflective topcoat on sound, chalked panels |
| Full restoration system | Starting at $3.75/sq ft | Includes rust treatment, fastener replacement, seam sealing, and two-coat system |
| Barn or workshop coating | On estimate | Large agricultural panels and outbuildings need an on-site look for access and rust severity |
| Travel | Included | in Oceanside and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (442) 333-2316, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight re-flash (single) | Starting at $600 | Includes removing old flashing and underlayment, custom-bent metal curb flashing, and new sealant at the frame joint. |
| Chimney counterflashing repair | Starting at $850 | Includes cutting a new reglet into the masonry, setting counterflashing, and sealing the stucco joint properly. |
| Chimney saddle or cricket rebuild | Starting at $1,400 | Includes framing a new cricket, custom-bent saddle metal, and re-flashing the full chimney base. |
| Valley or wall transition flashing | Starting at $750 | Includes opening the transition, replacing the metal and underlayment, and re-lapping the surrounding roofing material. |
| Complex or multi-penetration job | On estimate | Multiple chimneys, skylights, or transitions on one roof require an on-site look to scope the full repair. |
| Estimate | Free | Response within 24 hours at (442) 333-2316, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single entry-width guard run | Starting at $1,200 | Layout, seam clamps, and sealed install on one typical run above an entry |
| Multi-zone guard and rail system | Starting at $2,400 | Two or more drop zones, longer linear footage, and added attachment points |
| Surface-mount guards on corrugated panels | Starting at $1,400 | Gasketed fasteners at the purlin with sealant on exposed-fastener roofs |
| Guard plus gutter screen package | On estimate | Tree-heavy lots in Fallbrook and Bonsall need an on-site look first |
| Travel | Included | in Oceanside and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (442) 333-2316, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photo documentation, and written repair vs. replacement assessment included at no charge |
| Minor repair (fasteners, sealant, small panel) | Starting at $350 | Covers targeted re-fastening and re-sealing; price moves with roof pitch and access difficulty |
| Panel replacement or flashing repair | Starting at $850 | Includes panel or flashing replacement and re-seal; moves up with panel profile and penetration count |
| Full re-fastening or multi-panel repair | On estimate | Scope depends on panel field size and fastener condition, so we need an on-site look first |
| Insurance claim documentation | Included with repair | Photos and written scope from inspection through completed work, provided as part of the job |
| Travel | Included | in Oceanside and surrounding areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Full walk-over with photo report; roof size and pitch move the final number |
| Pre-purchase or insurance inspection | Starting at $250 | Formatted report with remaining life estimate; number of penetrations affects price |
| Large or steep-roof inspection | On estimate | Two-story or hillside access in Fallbrook and Bonsall needs an on-site look first |
| Travel | Included | in Oceanside and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (442) 333-2316, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| 5-inch seamless aluminum gutter | Starting at $9/linear ft | Includes on-site forming, hangers, end caps, outlets, and one basic downspout run. |
| 6-inch seamless aluminum gutter | Starting at $13/linear ft | Higher capacity for steep metal roofs, with heavier hanger spacing and larger downspouts. |
| Gutter guards (ember-resistant) | Starting at $4/linear ft | Adds screen coverage to keep debris and embers out, priced by linear footage. |
| Copper and specialty metal gutters | On estimate | Material cost and soldering labor vary, so we price after seeing the roof and run lengths. |
| Downspout and drainage routing | Starting at $150 per downspout | Covers downspout, fittings, and discharge to splash block or daylight outlet. |
| Estimate | Free | On-site measurement and written scope, response within 24 hours at (442) 333-2316. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Leak diagnosis and targeted repair | Free estimate | Includes roof walk, leak source identification and a written repair scope with photos of the failure points |
| Screw replacement and re-fastening | Starting at $1,450 | Covers failed fastener removal, new washers and resealing, with panel count and roof height driving the total |
| Exposed-fastener panel re-roof | Starting at $6.50/sq ft | Includes tear-off, underlayment and new screw-down panels, with slope and access affecting the rate |
| Standing seam commercial re-roof | On estimate | Scope depends on building size, seam layout, curb and penetration count, and permit requirements |
| Travel | Included | in Oceanside and surrounding North County areas, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (442) 333-2316, with no obligation to book the work |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Oceanside need look no further. Oceanside Metal Roofing is your local source for metal roof installation, replacement, re-roof, and repair on homes throughout the area. We understand the unique demands of coastal and inland North San Diego County: salt air and marine layer on the coast, intense sun and dry Santa Ana winds inland, and the ever-present threat of wildfires. Our network of licensed, bonded, and insured local contractors is experienced with the steep pitches, heavy tree cover, and high-elevation exposure found on many properties, as well as the large stock of aging screw-down roofs that are now due for service.
From the beach cottages of South O and the Spanish Revival bungalows near the pier to the stucco ranches of Fire Mountain and the two-story tract homes of Rancho del Oro, we serve Oceanside and surrounding areas including Carlsbad, Vista, San Marcos, and Escondido. Whether you need a minor repair or a full roof replacement, we bring straight guidance and quality workmanship to every project. Call (442) 333-2316 or request a free estimate today.
Metal roofs are durable, but they are not immune to leaks. The most common cause we see on 15 to 30 year old exposed-fastener roofs is fasteners backing out as the EPDM sealing washers dry, shrink, and lose their grip. Once that seal fails, water finds its way in. Other frequent culprits include seam separation from thermal movement, failed pipe boots and flashing at chimneys, skylights, and valleys, wind-lifted panels after a storm, and punctures from fallen limbs. If ignored, these issues worsen: water can track along purlins and decking far from the entry point, leading to rotted sheathing and insulation damage.
The honest call between repair and replacement depends on the roof's condition. Often, a full screw replacement and re-fastening can restore a watertight roof for a fraction of the cost of replacement. Our team will assess the situation and give you a straight answer, not a sales pitch. For active leaks, prompt metal roof leak repair is essential to prevent further damage.
If you suspect a problem, call (442) 333-2316 for a thorough inspection. We will identify the source, explain your options, and help you decide whether a targeted repair or a larger investment makes sense. Don't let a small leak become a major expense. Contact us today to schedule service.
We install and service a full range of metal roofing systems, and we match the system to your home, your budget, and your long-term goals. Standing seam metal roofing is the premium choice, with concealed fasteners and clean lines. For a more economical workhorse, corrugated and ribbed panel roofing is a proven option for cabins, barns, and workshops. We also offer metal shingle roofing, stone-coated steel roofing, and copper and specialty metal roofing for accents and distinctive looks.
Here is the honest comparison: standing seam costs more upfront and has no exposed screws to maintain, while screw-down systems cost less but require periodic fastener service over their lifespan. When it comes to installation method, a metal roof over shingles (retrofit) is a legitimate option if the deck is sound, but a full tear-off is necessary when it is not. We will walk you through the pros and cons so you can choose with confidence.
Metal roof costs in Oceanside vary based on several factors. Installations are typically quoted per square foot, while repairs are often flat-rate. Pricing depends on the panel system and metal gauge, roof pitch and complexity, whether you choose tear-off or recover, decking condition, and access to the roof. Because every roof is different, we provide typical ranges during our estimate and always note that final pricing depends on the roof and site conditions. Some insurance carriers may offer premium discounts for metal or impact-rated roofs, but you should confirm any discounts with your carrier.
For a clearer picture of what to expect, visit our pricing page. To get a personalized quote, request a free estimate or schedule a free roof inspection. We will give you honest numbers and straight advice, with no pressure and no surprises.
If your roof has storm damage, we can inspect it and provide written documentation with photos that you may submit to your own insurer. Please understand that we are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We are here to give you the information you need to navigate the process yourself.
Regarding permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city. Thresholds, fees, and inspection requirements are set locally, and historic district or HOA design review can affect panel profile and color choices. Requirements vary, always verify with the Oceanside building or planning department before starting your project. For help understanding the process or to schedule a consultation, contact us.
Ready to get started? Oceanside Metal Roofing serves in Oceanside and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Oceanside · Response within 24h · No commitment · ☎ (442) 333-2316
Your Free Quote Request